How To Create Unattend Xml Windows 10

Windows ten autounattned.xml (Image credit: Windows Cardinal)

When y'all kickoff a new installation of Windows 10, yous must go through the Windows Setup, which is the experience that helps yous to configure diverse settings, including linguistic communication preferences, production primal, and partition layout. After the installation, you also accept to go through the out-of-box experience (OOBE), which you need to complete to configure settings similar keyboard layout, account, and privacy settings.

Although the process is relatively easy for virtually people, you however accept to spend the fourth dimension controlling the installation and answering questions, which can have up a lot of fourth dimension, especially if you need to complete multiple installations in your workplace.

If yous want to automate the installation process (and save time in the process), you can create an answer file with instructions to complete every on-screen prompt, which you can integrate onto a bootable media. Then the Windows Setup can read to install Windows 10 automatically.

In this Windows 10 guide, we walk you through the steps to create an autounattend.xml reply file containing all the necessary settings to perform a basic unattended installation of the Os.

On Windows x, y'all can apply many ways to create and gear up an reply file to automate the installation process. This guide outlines the instructions to configure a ".xml" file to perform an unattended installation of Windows 10 Pro 64-bit on a computer with a single drive using Unified Extensible Firmware Interface (UEFI) or Bones Input-Output Organization (BIOS).

Later setting upwards the respond file, the procedure will erase everything on the drive, create and configure the necessary partitions, and install a fresh copy of Windows x with the most basic settings.

Alert: This is a friendly reminder that the installation process will completely erase the hard drive of your computer. If you lot accept annihilation important on this device, it's recommended to brand a full backup of your PC before proceeding.

• Requirements
• How to install Windows Organisation Image Manager
• How to create Windows 10 answer file project
• How to create Windows 10 answer file
• How to salve Windows ten answer file project
• How to install Windows 10 with answer file
• How to troubleshoot problems with Windows 10 respond file

Requirements

This guide has quite a few steps, and you'll demand a few things to consummate the project successfully:

• Windows Assessment and Development Kit (ADK).
• Windows 10 installation files.
• Windows x business relationship with administrator privileges.
• USB flash bulldoze with 8GB of space.
• Spare computer to test the installation.

How to install Windows System Prototype Manager

Anyone can write an answer file manually. Microsoft offers the Windows System Paradigm Manager (SIM) console bachelor through the Windows Assessment and Deployment Kit (ADK) to go far easier to create the file to install Windows ten unattended.

To install the Windows Arrangement Image Manager, employ these steps:

1. Download the Windows ADK installer (opens in new tab) for Windows x version 2004.
2. Double-click the adksetup.exe file to brainstorm the installation.
3. Select the Install the Windows Assessment and Deployment Kit - Windows x to this computer option.

Source: Windows Primal (Image credit: Source: Windows Central)

4. Click the Adjacent push button.
5. Select your privacy setting.
6. Click the Next push.
7. Click the Accept button to concord to the license agreement.
8. Clear all preselected choices.
9. Cheque but the Deployment Tools package to install the Windows System Image Managing director components.

Source: Windows Central (Prototype credit: Source: Windows Primal)

10. Click the Install push.
11. Click the Close button.

Once you lot complete the steps, you tin can utilise the console to create a ".xml" file with the answer to all the questions to automatically install Windows 10.

Afterward the file is created, you tin adjust the settings and reuse it for other installations, instead of having to use the Windows Organization Image Manager tool.

How to create Windows ten answer file project

After installing the Windows System Image Manager console, you need to import the OS installation files onto your device, and set up the environment to create an reply file.

Import Windows 10 paradigm files

To create an answer file, you need to open a Windows 10 image and create a catalog of all the components to automate the installation. Withal, to perform this task, yous must commencement import the installation files onto your device.

To import the Windows 10 installation files, employ these steps:

1. Open File Explorer.
2. Navigate to the Windows x ISO file location.Quick tip: Alternatively, you can also connect the USB flash bulldoze with the installation files. If you lot don't have the files below, you tin find the steps to use Rufus to download the latest ISO for Windows 10.
3. Right-click the ISO file and select the Mount pick.

Source: Windows Central (Image credit: Source: Windows Fundamental)

4. Open the bulldoze with the Windows 10 installation files.
5. Click the Select all push from the "Dwelling house" tab.
6. Click the Copy button from the "Home" tab.

Source: Windows Central (Prototype credit: Source: Windows Key)

7. Navigate to the binder you want to employ to store the files for the project.
8. Click the New binder button from the "Home" tab.
9. Specify a proper name for the binder – for example, Windows2004.
10. Open the newly created folder.
11. Click the Paste push from the "Home" tab.

Source: Windows Fundamental (Image credit: Source: Windows Central)

In one case you complete the steps, the installation files will be available on your device. Nevertheless, to keep, you lot need to ostend the install.wim file image is nowadays in the "sources" folder. If the ISO was created using the Media Cosmos Tool, you're likely to have an install.esd, which you won't exist able to open up because information technology'due south encrypted.

If you don't accept an .wim image file, you can get the uncrypted image by downloading the latest Windows 10 ISO file from the Windows Insider Program (opens in new tab) or MSDN with a subscription (opens in new tab).

Convert install.esd to install.wim

In the case that yous're stuck with an "install.esd" image, you can use the DISM control tool to consign the epitome files and create a ".wim" epitome from a ".esd" file.

To decrypt an install.esd image, use these steps:

1. Open Get-go.
2. Search for PowerShell, right-click the top result, and select the Run equally administrator option.
3. Type the post-obit control to identify the index number of the edition you want to use and press Enter:dism /Become-WimInfo /WimFile:C:\path\to\binder\sources\install.esdIn the control, make certain to change the path to the sources folder location with the "install.esd" file on your computer.
4. Confirm the index number for the edition yous want to deploy. For example, in the case, select the alphabetize number of half dozen to excerpt the files for Windows 10 Pro.
5. Type the following control to create an install.wim file and printing Enter:dism /Export-Image /SourceImageFile:C:\path\to\folder\sources\install.esd /SourceIndex:six /DestinationImageFile:C:\path\to\folder\sources\install.wim /Compress:Max /CheckIntegrityIn the command, make certain to change the path to the sources binder location with the "install.esd" file on your device. The destination path should be the same every bit the source.

Source: Windows Central (Epitome credit: Source: Windows Central)

Alternatively, you can too use the Rufus tool to download the Windows x ISO with an "install.wim" file.

Download install.wim using Rufus

To download a Windows 10 ISO file with Rufus, use these steps:

1. Open Rufus download page.
2. Under the "Download" section, click the latest release of the tool to save the file on the estimator.

Source: Windows Central (Image credit: Source: Windows Central)

3. Double-click the Rufus-x.ten.exe file to launch the tool.
4. Nether the "Device" department, select the USB wink drive with at least 8GB of space.
5. Under the "Boot selection" section, click the pointer push button next to the "Select" selection, and choose the Download option.

Source: Windows Cardinal (Image credit: Source: Windows Cardinal)

6. Click the now bachelor Download button.
7. Employ the "Version" drop-down carte du jour and select Windows 10.
8. Click the Continue button.
9. Select the 20H1 (Build 19041.264 - 2020.05) option to download the Windows 10 May 2020 Update.
10. Click the Go along button.
11. Use the "Edition" drop-downwardly menu and select the Windows 10 Abode/Pro option.
12. Click the Continue button.
13. Use the "Linguistic communication" drop-down bill of fare and select your installation linguistic communication.Quick annotation: If you're in the Us, you should select "English" instead of "English International."
14. Click the Continue button.
15. Use the "Architecture" drop-downward bill of fare and select the 32-bit or 64-bit (recommended).Quick tip: Yous can find out the architecture of your device on Settings > System > Virtually, nether Device specifications.
16. Cheque the Download using a browser selection.

Source: Windows Cardinal (Image credit: Source: Windows Key)

17. Click the Download button.
18. Save the ISO file on your device.

Once you complete the steps, you'll end up with an ISO file of Windows x that includes the install.wim file inside the "sources" folder.

Setting up an answer file surround

To gear up the environs to create a new answer file project, use these steps:

1. Open Kickoff.
2. Search for Windows Organization Image Managing director and click the top result to open the console.
3. Click the File carte.
4. Select the Select Windows Image option.

Source: Windows Central (Image credit: Source: Windows Fundamental)

5. Navigate to the binder with the Windows 10 installation files exported.
6. Access the source binder.
7. Select the install.wim epitome file.

Source: Windows Key (Epitome credit: Source: Windows Central)

8. Click the Open up button.Important: Brand sure that image is an install.wim file. Otherwise, if you have an install.esd image, this volition not work.
9. Select the edition of Windows 10 you lot desire to utilize. (Usually, yous want to select the version that y'all're planning to install.)

Source: Windows Central (Prototype credit: Source: Windows Central)

10. Click the OK push.
11. Click the Yes button to create a new catalog file (if applicable).Quick note: This process will take some time, simply it's a one-fourth dimension process. The .clg file volition be saved in the same location where the install.wim is stored, and you can reuse it later on other projects.
12. Under the "Distribution Share" section, right-click on "Select a Distribution Share" and select the Create Distribution Share option.

Source: Windows Fundamental (Image credit: Source: Windows Fundamental)

13. Click the Create New Folder option in the dialog box.
14. Specify a name for the folder – for case, "Distribution" and select the binder.
15. Click the Open up button.

Source: Windows Central (Image credit: Source: Windows Central)

16. Click the File carte du jour.
17. Select the Select Distribution Share option.

Source: Windows Key (Paradigm credit: Source: Windows Central)

18. Locate the folder yous recently created for the distribution files.
19. Click the Open button.
20. Click the File menu.
21. Select the New Answer File selection.

Source: Windows Fundamental (Image credit: Source: Windows Cardinal)

After you complete the steps, the environs will be created to configure an respond file.

How to create Windows 10 reply file

An answer file contains seven unlike stages (passes) (opens in new tab), and the stages y'all need to configure volition depend upon the blazon of automation you want to create.

This guide will help you to get started configuring an autounattend.xml answer file with the minimum requirements to automate the installation of Windows 10 Pro using the 1 windowsPE, 4 specialize, and 7 oobeSystem stages.

Laissez passer ane windowsPE

Using the laissez passer "1 windowsPE," you'll ready up region and language, bulldoze configuration, installation location, and product fundamental.

Quick note: Depending on the image, you may run across the components name starting with amd64_Microsoft-Windows for the 64-bit version or x86_Microsoft-Windows for the 32-chip version of Windows 10. For this guide, we'll be using the amd64_Microsoft-Windows name format.

Configure language and region settings

To configure the region and language settings, while in the Windows System Prototype Managing director, use these steps:

1. Under the "Windows Image" section, expand the Components folder.
2. Expand the amd64_Microsoft-Windows-International-Core-WinPE component.
3. Right-click the SetupUILanguage component and select the Add Setting to Pass 1 windowsPE pick.

Source: Windows Central (Image credit: Source: Windows Central)

4. Nether the "Respond File" section, on the right side, select the amd64_Microsoft-Windows-International-Core-WinPE component.
5. Nether the "Settings" section, on the right side, define the keyboard, region, principal and fall dorsum linguistic communication, and device location. For example, if you're located in the Us, you should exist using these settings:
   • InputLocale: en-US.
   • SystemLocale: en-US.
   • UILanguage: en-The states.
   • UserLocale: en-U.s..
   Quick tip: Only users outside the United States should configure ULLanguageFallback using the en-U.s. value as the fallback language. To identify the correct input profile proper name, you lot can check out this Microsoft back up folio (opens in new tab).

Source: Windows Central (Image credit: Source: Windows Central)

6. Select the SetupUILanguage sub-component.
7. Under the "Settings" section, on the right side, fix UILanguage with the right language. For example, because nosotros're doing an install in "English language," we're using the en-The states option.

Source: Windows Central (Epitome credit: Source: Windows Central)

Configure installation settings

Inside the answer file, you also have to specify the settings to properly configure the drive.

To configure the bulldoze settings in the answer file, use these steps:

1. Under the "Windows Prototype" department, expand the Components folders.
2. Expand the amd64_Microsoft-Windows-Setup component.
3. Aggrandize the DiskConfiguration component.
4. Correct-click the Deejay component, and select the Add Setting to Pass i windowsPE selection.

Source: Windows Central (Prototype credit: Source: Windows Central)

5. Under the "Answer File" section, on the correct side, select the DiskConfiguration component.
6. Under the "Settings" section, on the right side, set up the WillShowUI value to OnError. (If you leave this setting empty, the installation will end during the hard bulldoze setup process.)

Source: Windows Central (Image credit: Source: Windows Primal)

7. Select the Disk component.
8. Under the "Settings" section, on the correct side, use these values:
   • DiskID: 0
   • WillWipeDisk: true
   Quick note: Setting the WillWipeDik setting to true volition make sure to erase everything on the showtime hard drive earlier setting up the partitions. If yous accept annihilation of import on this drive, you lot should fill-in the data before proceeding.

Source: Windows Key (Image credit: Source: Windows Central)

One time you complete the steps to configure the DiskConfiguration settings, you'll need to set up upwards the partitioning layout, depending on whether your device uses a legacy BIOS or UEFI.

The reason is that BIOS-based computers just require 2 partitions (System Reserved and Windows), and UEFI-based devices require iv partitions (WinRE, EFI, MSR, and Windows).

You lot tin can check if you're using BIOS or UEFI by opening System Data from the Start bill of fare, and checking the "System Summary." If "BIOS Mode" reads Legacy, then you're using BIOS; if information technology reads UEFI, you're using UEFI.

BIOS only: Creating and modifying partitions

If y'all take a computer using the legacy BIOS, continue with these steps. Otherwise, skip this role, and follow the UEFI instructions below.

To configure the partition layout for a device using BIOS, utilize these steps:

1. Nether the "Answer File" section, expand the amd64_Microsoft-Windows-Setup component.
2. Expand the DiskConfiguration component.
3. Expand the Disk component.
4. Right-click the CreatePartitions component, and select the Insert New CreatePartition selection to create the first partition.

Source: Windows Cardinal (Image credit: Source: Windows Central)

5. Right-click CreatePartitions once more, and select the Insert New CreatePartition option to create a 2d partition.
6. Select the first CreatePartition.
7. Nether the "Settings" section, on the right side, utilize these values to create a system reserved partition:
   • Extend: false.
   • Order: 1.
   • Size: 500.
   • Type: Primary.
   Using these settings, you're indicating the setup to create the system reserved partition of 500MB, a division required for Windows to boot.

Source: Windows Central (Epitome credit: Source: Windows Central)

8. Select the second CreatePartition.
9. Under the "Settings" section, on the correct side, utilise these values to create a partition to install Windows 10:
   • Extend: true.
   • Order: two.
   • Type: Primary.
   Using these settings, yous're indicating the setup to create a sectionalisation to install Windows 10. You'll as well detect that the Size value wasn't specified, and Extend was fix to true. This is because we want the Windows Setup to create a partition with all the available space left on the bulldoze afterwards creating the system reserved partition.If you want to create multiple partitions, you demand to set up the value of Extend to false, and enter a value in megabytes in the Size setting. So the concluding partition should take Extend set to true without specifying the Size value to indicate the setup to use the remaining available space to create the sectionalisation.

Source: Windows Central (Image credit: Source: Windows Primal)

Using the above steps, outlined the steps to carved the partitions. The next steps specify the required file format and partition properties.

To specify the format settings in the answer file, use these steps:

1. Under the "Reply File" section, aggrandize the amd64_Microsoft-Windows-Setup component.
2. Aggrandize the DiskConfiguration component.
3. Expand the Disk component.
4. Right-click the ModifyPartition component, and select the Insert ModifyPartition pick to alter the first partitioning.

Source: Windows Primal (Image credit: Source: Windows Central)

5. Right-click ModifyPartition once more, and select the Insert ModifyPartition choice to modify the second division.
6. Select the beginning ModifyPartition.
7. Under the "Settings" department, on the correct side, use these values to configure a system reserved division:
   • Agile: true.
   • Format: NTFS.
   • Label: System.
   • Society: 1.
   • PartitionID: ane.

Source: Windows Central (Prototype credit: Source: Windows Central)

8. Select the 2d ModifyPartition.
9. Under the "Settings" section, on the correct side, utilize these values to configure a partition to install Windows 10:
   • Format: NTFS.
   • Characterization: Windows.
   • Letter: C.
   • Order: 2.
   • ProductID: 2.

Source: Windows Central (Image credit: Source: Windows Primal)

In the steps, using the Order and PartitionID, you're specifying how the Windows Setup should configure on each of the two raw partitions nosotros created before.

You can learn more near the partition layout required for a BIOS system in this Microsoft support page (opens in new tab).

As part of this setup, the last task is to signal the setup where to install Windows 10.

To select the drive to install Windows x automatically, employ these steps:

1. Under the "Windows Prototype" department, expand the Components folders.
2. Expand the amd64_Microsoft-Windows-Setup component.
3. Expand the ImageInstall component.
4. Expand the OSImage.
5. Right-click the InstalTo component, and select the Add Setting to Pass 1 windowsPE selection.

Source: Windows Central (Image credit: Source: Windows Cardinal)

6. Nether the "Reply File" section, on the right side, select the InstallTo component.
7. Under the "Settings" section, on the right side, use these values:
   • DiskID: 0.
   • PartitionID: 2.

Source: Windows Fundamental (Image credit: Source: Windows Central)

The higher up settings tell the setup to install Windows x automatically on the start drive inside the 2d partitioning.

Once y'all consummate the steps, continue with the Defining the product key instructions.

UEFI only: Creating and modifying partitions

If you lot accept a computer using UEFI, continue with these steps. Otherwise, skip this role, and follow the BIOS instructions outlined above.

1. Nether the "Answer File" section, expand the amd64_Microsoft-Windows-Setup component.
2. Expand the DiskConfiguration component.
3. Expand the Disk component.
4. Right-click the CreatePartitions component, and select the Insert New CreatePartition selection to create the kickoff partition.

Source: Windows Central (Image credit: Source: Windows Central)

5. Right-click CreatePartitions again, and select the Insert New CreatePartition option to create a second sectionalization.
6. Right-click CreatePartitions again, and select the Insert New CreatePartition option to create a 3rd partition.
7. Correct-click CreatePartitions over again, and select the Insert New CreatePartition option to create a quaternary partition.
8. Select the first CreatePartition.
9. Nether the "Settings" department, on the right side, use these values to create the Windows Recovery (WinRE) partition:
   • Extend: false.
   • Order: 1.
   • Size: 500.
   • Type: Principal.

Source: Windows Cardinal (Image credit: Source: Windows Central)

10. Select the 2nd CreatePartition.
11. On the correct side, under "Settings," use these values to create an EFI segmentation:
    • Extend: imitation.
    • Society: 2.
    • Size: 100.
    • Type: EFI.

Source: Windows Cardinal (Image credit: Source: Windows Central)

12. Select the third CreatePartition.
13. On the right side, under "Settings," apply these values to create a Microsoft reserved partition (MSR) partition:
    • Extend: false.
    • Order: 3.
    • Size: 16.
    • Type: MSR.

Source: Windows Central (Image credit: Source: Windows Central)

14. Select the third CreatePartition.
15. On the right side, nether "Settings," use these values to create the Windows sectionalization:
    • Extend: true.
    • Lodge: 4.
    • Blazon: Chief.

Source: Windows Central (Paradigm credit: Source: Windows Central)

Using the in a higher place steps, outlined the steps to carved the partitions. The next steps specify the required file format and partition properties.

To specify the format settings in the answer file, apply these steps:

1. Under the "Respond File" department, expand the amd64_Microsoft-Windows-Setup component.
2. Expand the DiskConfiguration component.
3. Expand the Disk component.
4. Right-click the ModifyPartition component, and select the Insert ModifyPartition option to create the first sectionalization.

Source: Windows Key (Paradigm credit: Source: Windows Central)

5. Correct-click ModifyPartition again, and select the Insert ModifyPartition option to change the second partition.
6. Right-click ModifyPartition again, and select the Insert ModifyPartition pick to modify the third partition.
7. Correct-click ModifyPartition once again, and select the Insert ModifyPartition option to modify the 4th partitioning.
8. Select the first ModifyPartition.
9. On the right side, under "Settings," use these values to configure the Windows Recovery (WinRE) sectionalisation:
   • Format: NTFS.
   • Label: WinRE.
   • Guild: one.
   • PartitionID: 1.
   • TypeID: DE94BBA4-06D1-4D40-A16A-BFD50179D6AC.

Source: Windows Central (Epitome credit: Source: Windows Cardinal)

10. Select the second ModifyPartition.
11. On the right side, nether "Settings," employ these values to configure an EFI partition:
    • Format: FAT32.
    • Label: System.
    • Order: 2.
    • PartitionID: 2.

Source: Windows Fundamental (Paradigm credit: Source: Windows Fundamental)

12. Select the third ModifyPartition.
13. On the correct side, nether "Settings," use only these 2 values to configure a Microsoft reserved partition (MSR) partition:
    • Order: 3.
    • PartitionID: 3.

Source: Windows Central (Image credit: Source: Windows Key)

14. Select the third ModifyPartition.
15. On the right side, under "Settings," use these values to configure a sectionalization to install Windows ten:
    • Format: NTFS.
    • Label: Windows.
    • Letter: C.
    • Guild: 4.
    • PartitionID: four.

Source: Windows Central (Paradigm credit: Source: Windows Cardinal)

In the steps, using the Club and PartitionID, you're specifying how the setup should configure each of the four raw partitions y'all have created before.

You tin can learn more near the segmentation layout required for a UEFI system in this Microsoft support page (opens in new tab).

Equally role of this part of the setup, the terminal chore is to point the setup where to install Windows x.

To select the drive to install Windows 10 automatically, use these steps:

1. Under "Windows Image," expand the Components folders.
2. Expand the amd64_Microsoft-Windows-Setup component.
3. Expand the ImageInstall component.
4. Expand the OSImage component.
5. Right-click the InstalTo component, and select the Add Setting to Pass 1 windowsPE option.
6. Under the "Answer File" section, on the right side, select the InstallTo component.
7. Under the "Settings" department, on the right side, employ these values:
   • DiskID: 0.
   • PartitionID: 4.

Source: Windows Cardinal (Image credit: Source: Windows Central)

The above settings will indicate for the setup to install Windows ten on the first drive inside the fourth partition.

Once you complete the steps, go along with the Defining the product key instructions below.

Defining the production fundamental

In the commencement laissez passer, yous tin also specify the product key for Windows 10. If yous're creating an respond file that yous'll use in multiple devices, you lot should be using a volume or generic production key.

To specify a product key, use these steps:

1. Nether the "Windows Image" component, aggrandize the Components folders.
2. Aggrandize the amd64_Microsoft-Windows-Setup component.
3. Expand the UserData component.
4. Right-click the ProductKey component and select the Add together Setting to Pass 1 windowsPE option.

Source: Windows Cardinal (Prototype credit: Source: Windows Key)

5. Under the "Answer File" section, on the right side, select the UserData component.
6. Under the "Settings" section, on the correct side, use the following settings:
   • AcceptEula: true.
   • Organization: WC.
   In the above settings, you lot tin can use any name for the Organization value. For case, home users could "Family" as the organisation name.

Source: Windows Cardinal (Image credit: Source: Windows Key)

7. Expand the UserData component.
8. Select the ProductKey component.
9. Under the "Settings" department, make certain to update the Key value using the product central for the edition of Windows x you lot intend to install.

Source: Windows Central (Epitome credit: Source: Windows Central)

You can besides use a generic production central to create an answer file:

• Windows 10 Pro: VK7JG-NPHTM-C97JM-9MPGT-3V66T.
• Windows ten Home: YTMG3-N6DKC-DKB77-7M9GH-8HVX7.
• Windows 10 Enterprise: NPPR9-FWDCX-D2C8J-H872K-2YT43.

You lot tin can always check this Microsoft support website (opens in new tab) to discover the appropriate generic central for your installation.

Pass four specialize

If you want to configure additional settings, such every bit model, manufacturer, computer proper noun, buying name, timezone, and more during the installation, while in the Windows Organization Image Manager, use these steps:

1. Under the "Windows Paradigm" section, aggrandize the Components folders.
2. Expand the amd64_Microsoft-Beat out-Setup component.
3. Correct-click the OEMInformation component and select the Add together Setting to Pass 4 specialize selection.

Source: Windows Key (Image credit: Source: Windows Primal)

4. Under the "Answer File" department, on the right-side, select the amd64_Microsoft-Beat out-Setup component.
5. Under the "Settings" section, on the right side, use the following values (specifying your custom information):
   • ComputerName: Workstation.
   • CopyProfile: true.
   • RegisteredOrganization: Windows Central.
   • RegisteredOwner: WC.
   • TimeZone: Eastern Standard Fourth dimension.
   If you lot don't configure the TimeZone setting, Windows 10 will set the zone based on the language you're installing. You can check the Microsoft support website (opens in new tab) to find out the exact proper name for your time zone.

Source: Windows Central (Image credit: Source: Windows Central)

6. Expand the amd64_Microsoft-Crush-Setup component.
7. Select the OEMInformation component.
8. (Optional) Nether the "Settings" section, on the right side, specify some calculator specific properties:
   • Manufacturer: Dell.
   • Model: XPS.

Source: Windows Central (Image credit: Source: Windows Fundamental)

One time you complete the steps, during the installation, the setup will read the autounattend.xml file and configure the settings you specified.

Pass 7 oobeSystem

Using an answer file, you tin can also automate the configuration of the out-of-box feel (OOBE), including additional language settings, accept the licensing understanding, create a user account, and more.

To configure the out-of-box experience, while in the Windows System Paradigm Manager, apply these steps:

1. Nether "Windows Image," aggrandize the Components folders.
2. Correct-click the amd64_Microsoft-Windows-International-Core component, and select the Add together Setting to Pass 7 oobeSystem option.

Source: Windows Central (Image credit: Source: Windows Central)

3. Nether the "Windows Prototype" section, expand the amd64_Microsoft-Shell-Setup component.
4. Right-click the OOBE component, and select the Add together Setting to Pass seven oobeSystem option.

Source: Windows Central (Prototype credit: Source: Windows Fundamental)

5. Aggrandize the UserAccounts component.
6. Expand the LocalAccounts component.
7. Right-click the LocalAccounts component, and select the Add together Setting to Pass seven oobeSystem pick.

Source: Windows Key (Image credit: Source: Windows Primal)

8. Nether the "Reply File" section, select the amd64_Microsoft-Windows-International-Core component.
9. Under the "Settings" section, on the right-side, specify the language settings:
   • InputLocale: en-Usa.
   • SystemLocale: en-US.
   • UILanguage: en-US.
   • UserLocale: en-US.
   Only users outside the United States should configure ULLanguageFallback using the en-U.s.a. value equally the fallback language.To identify the right input contour name, y'all can bank check out this Microsoft back up page (opens in new tab).

Source: Windows Key (Epitome credit: Source: Windows Fundamental)

10. Nether the "Answer File" department, expand the amd64_Microsoft-Shell-Setup component.
11. Select the OOBE component.
12. Nether the "Settings" section, on the right size, apply the following values:

• HideEULAPage: true.*
• HideOEMRegistrationScreen: true.
• HideOnlineAccountScreens: truthful.
• HideWirelessSetupinOOBE: true.
• ProtectYourPC: 1.While most settings are cocky-explanatory, you'll detect that the ProtectYourPC setting is also configured to define how the express settings (opens in new tab) should be handled. Using the value of i, you're telling the setup to enable the express settings using the default preferences.
  1. Aggrandize the UserAccounts component.
  2. Right-click the LocalAccounts component and select the Insert New LocalAccount option.
  3. Under the "Settings" section, on the correct side, use the following configuration to create a primary local business relationship:
  • Description: My chief local business relationship.
  • DisplayName: admin.
  • Group: Administrators.
  • Name: John.
  Using the above settings, you'll exist creating an business relationship called "admin" for user "John," and we're adding the account to the "Administrators" group that gives the user unrestricted admission to the device. Of course, yous can always ascertain your custom preferences, including for "Description," "DisplayName," "Group," and "Name."
  1. Aggrandize the LocalAccount component.
  2. Select the Password component.
  3. Under the "Settings" department, on the correct-side, type a password in the Value field.

Source: Windows Central (Image credit: Source: Windows Central)

Source: Windows Fundamental (Image credit: Source: Windows Central)

Source: Windows Central (Prototype credit: Source: Windows Key)

While yous'll run across the password in apparently text, afterwards saving the autounattend.xml file, the value will be encrypted.

How to save Windows x answer file project

Once you complete setting upwardly all the configurations to install Windows 10 automatically, yous demand to remove all the unmodified components, validate the answer file, and save changes as an autounattend.xml file.

Remove unmodified components

To remove unnecessary components, use these steps:

1. Under the "Answer File" section, expand all the components y'all added from the "Windows Epitome" department.
2. Select the component that y'all didn't configure. (These are those with light purple color.)
3. Correct-click the components, and select the Delete option.

Source: Windows Cardinal (Image credit: Source: Windows Central)

4. Echo steps No. 2 and 3 until y'all remove all the components that you didn't modify.

After you lot complete the steps, you demand to validate the answer file.

Validating answer files

To validate the respond file, employ these steps:

1. Click the Tools carte.
2. Select the Validate option.
3. Under the "Messages" section, at the bottom, check the Validation tab. If you don't come across any warnings, the file is good to go.

Source: Windows Cardinal (Image credit: Source: Windows Central)

Once you complete the steps, it's time to save the file and imported to the installation media.

Saving the answer file

To save the answer file, use these steps:

1. Click the File card.
2. Select the Relieve Respond File As selection.
3. Navigate to the folder you want to relieve the file.
4. Under "File name," utilise the autounattend.xml file proper noun.

Source: Windows Central (Prototype credit: Source: Windows Central)

5. Click the Salvage button.

If yous're configuring multiple answer files, information technology'll be best to save the file on a different binder with a descriptive name.

Import answer file to USB media

To include an autounattend.xml file on a Windows 10 bootable media, use these steps:

1. Open File Explorer.
2. Navigate to the autounattend.xml file location.
3. Right-click the file, and select the Re-create pick.

Source: Windows Cardinal (Image credit: Source: Windows Central)

4. Open the USB media with the Windows x installation files.
5. In the root of the drive, right-click the Paste to copy the autounattend.xml to the Windows 10 installation media.Quick tip: When placing the "autounattend.xml" file on the installation media, make sure you're using a bootable media that only includes one architecture (in this instance, Windows 10 64-scrap). If you created an installation media for both 32-flake and 64-bit, the procedure would break at the beginning until yous select the architecture to install.

Source: Windows Central (Paradigm credit: Source: Windows Key)

In the case that y'all don't take a Windows 10 USB installation media, you lot can create one using the Media Cosmos Tool (opens in new tab) or using a third-party tool, such equally Rufus.

How to install Windows 10 using answer file

One time you have the USB bootable media with the answer file incorporated, you can perform an unattended installation of Windows 10 with these steps:

Warning: This process will delete everything on your computer and install Windows ten without any prompts. Make sure to connect the USB flash drive to the correct device. Otherwise, yous may cease upwardly wiping out the wrong device.

1. Turn off the figurer y'all want to install Windows 10.
2. Connect the USB flash bootable media with the autounattend.xml file.
3. Power on the computer and then Windows x should install automatically.

If the Windows Setup doesn't start, information technology's probable because y'all don't have the device configured to kicking from the USB installation media. If this is the case, y'all'll need to access the BIOS or UEFI firmware on your motherboard to change the boot social club.

This process typically requires striking i of the role keys (F1, F2, F3, F10, or F12), the ESC, or Delete key equally soon as you lot start your device. However, these settings will be different per manufacturer, and even per device model. Make sure to cheque your computer manufacturer's support website for more specific instructions.

Subsequently getting access to the firmware interface, notice the Boot settings and change the boot social club to kickoff with the USB drive that includes the installation files, and save the settings (usually using the F10 key).

Source: Windows Key (Image credit: Source: Windows Central)

If your computer is based on UEFI, then the steps to alter the kick lodge will be unlike.

On a Windows 10 device using UEFI, you'll need to access to Settings > Update & Security > Recovery, and under "Avant-garde Startup," click the Restart at present button.

Then click on Troubleshoot > Advanced options > UEFI Firmware Settings, and click the Restart button.

One time y'all're in the UEFI firmware interface, notice the Boot settings and modify the boot order to start with the USB drive that includes the installation files, and then salvage the settings.

Source: Windows Central (Image credit: Source: Windows Central)

If the drive doesn't have an OS already installed, cheque your manufacturer support website for details to access the UEFI firmware.

How to troubleshoot Windows ten answer file

Although an answer file can make the process of installing Windows 10 easier, ane small mistake can halt the setup and cause unwanted errors.

When validating the respond file, if y'all come across any problems, you should e'er re-bank check the settings for each component you selected and remove any additional chemical element that was non modified.

If yous made a mistake configuring a property value for a component, don't empty the field, instead right-click the holding and select the Revert Modify option.

At the fourth dimension to begin the Windows x installation, disconnect the computer from the network, because sometimes you may come across problems while the setup is trying to download updates. You can always reconnect to the network after the installation.

An answer file explicitly crafted for a computer using a legacy BIOS will non work on a UEFI-based device. Always brand certain to use the right settings for the hardware you're trying to automate the installation process.

In the rare case that the answer file you created using Windows System Image Managing director isn't working, then you should open the "autounattend.xml" file with any text editor and correct any mistake manually.

Anyone tin utilise this automation process, but this method has been designed for organizations. This ways that you won't find an pick to perform an installation using a Microsoft account. Nevertheless, y'all can e'er create an installation with a Windows 10 local account and then link it to your Microsoft business relationship. You lot can perform this task from Settings > Accounts > Your info, and clicking the Sign in with your Microsoft account instead link.

You lot can check out this Microsoft support website (opens in new tab) to learn more than almost each setting, which y'all tin configure to create an answer file to perform an automated installation of Windows ten.

Wrapping things upwards

While creating a bootable media with the instructions to install Windows 10 automatically has a lot of steps, the automation process volition salvage you a significant amount of time and hassle, peculiarly when you're in a network environs where you need to setup Windows 10 on multiple machines.

We're focusing on the minimum steps to perform an unattended clean installation of Windows 10 to help become started with the process. It'southward upwards to yous to dig through and configure the components you need to comply with your situation. Furthermore, depending on your installation requirements, you may need to create multiple answer files.

Mauro Huculak is technical writer for WindowsCentral.com. His primary focus is to write comprehensive how-tos to assistance users get the virtually out of Windows 10 and its many related technologies. He has an IT background with professional certifications from Microsoft, Cisco, and CompTIA, and he's a recognized member of the Microsoft MVP community.

Source: https://www.windowscentral.com/how-create-unattended-media-do-automated-installation-windows-10

Posted by: fosterager1944.blogspot.com

Share this post